How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have to follow a series of unique steps to add a second ignition key. It requires dealer service using an electronic handheld computer called Tech-2. Then a new car key and transponder have to be purchased and then programmed to the car.
Rotate your keys to stop one from deteriorating faster than another. This will also help to keep your keys in top condition.
replacement key for saab 93 g28carkeys.co.uk
In contrast to the traditional Saab keys of old keys, the new key fobs have electronics inside that make it difficult to make a copy. This has made theft of cars a lot more difficult than it was just a few years ago. However, it has also made the replacement of lost keys an incredibly expensive endeavor.
Every owner of a 9-3 Saab should have at a minimum two functioning keys. It is costly to replace a lost or damaged key since it requires replacing the CIM module, as well as reconfiguring the locking cylinders. Dealers charge between $100-$200 for this.
There are ways to cut down on these costs. Some parts providers will use the code of an extra key to cut a new metal blade at a fraction what the dealer charges. The key must be exactly the identical to the original one for it to work in your vehicle.
Follow these steps to replace the case. You will need a flathead screwdriver along with some patience. With the screwdriver slowly tear the plastic away and then separate the emergency key from the case. Once the case has been opened take the electronics out and place them into your new case. Make sure you insert the correct badge and key back in the case too.
Replacement Battery
The replacement battery for the Saab 9-3 is a low-cost part that can be replaced easily and quickly. This YouTube tutorial for DIY Cyclone Cyd, a user on YouTube, explains how to replace the battery for the remote key fob in just four steps. This tutorial should work for any modern saab-type key fob, however the procedure might differ slightly.
The first step is to locate the button that releases the backup key in the fob. It's usually just below the Saab logo on the back of the fob. Next use an screwdriver with a flat head to insert into the tiny hole in this button. This should be enough to unlock the fob's case so that you can replace the battery.
Once the new CR1632 battery is installed, you can reassemble the remote key fob, and then program it to your car. The procedure should take no more than an hour, if not less. This is a very easy process that doesn't require any special tools.
If you lose a key the procedure will be somewhat more complex but it is still able to be completed. The dealer must first read the VIN of the vehicle and then order an additional TWICE module and key blade with the correct unique code. Then, they'll have to cut the replacement key and then program it with the latest software tool known as MDI.
Replacement Key Fob
The key fob is the part that locks and unlocks your car, it has batteries inside. The batteries are able to last for and eventually expire. This is a regular issue that occurs with all vehicles and the good news is that you can replace the batteries in many key fobs without replacing the whole case. Amazon sells replacement fobs that have all the electronic components installed. You can simply pop the case open and replace the batteries. It is important to keep in mind that you'll have to remove the emergency key first. you can do this by inserting a small flathead screwdriver into the slot found in the middle of the case. The case should split when you move the screwdriver around it.
If you're looking to replace your keys, keep a spare available. This will save you lots of money. If you have an extra key, you can request the dealer to cut it in half and program it to your vehicle. This is less expensive than purchasing a new fob.
It is possible to add a second key to your car If you don't already have one, however it requires some research and work. It can cost a few hundred dollars to purchase a second car key. The computer of the vehicle must also be programmed. Professionals can accomplish this however it's a costly option.
Replacement Ignition
In contrast to the earlier Saab automobiles, the new SAAB 9-3 models use an upgraded alarm system that is dependent on a coded keys. If you lose your only key, it may be costly to purchase a new one because the car must have a special computer added and also be programmed to accept a new key. Locksmiths typically aren't able to program this, and even dealers will charge hundred dollars just to program the new key!
Dealers will charge you top dollar to replace your car computer (also called the CIM or SAAB twice) when you lose your sole working key. Instead, we can reprogram the EEPROM of your current car computer, preparing it for a replacement key, and save you over 50% of the amount you pay at a dealership.
If you've owned a car like the SAAB 9-3 for quite a while, you know that the ignition keys aren't very durable. They can get extremely sticky, and the buttons can be ripped off occasionally It is recommended that you consider getting a replacement if yours isn't performing as it should. Luckily, replacing the ignition key isn't as complicated as it sounds and can be done fairly quickly with the appropriate tools.